Topsides & Bridges STR/PVV Supervisor
Kintec Recruitment Limited
Umm Salal Muhammed, Umm Salal Municipality, Qatar
منذ 22 ساعات
source : Oil and Gas Job Search

The job holder manages, under the responsibility of STR / PVV Superintendent, all construction activities related to the NWHP01 Topsides and Bridges EPCIC2 Contract, and shall demonstrate a strong behavior with regard to Construction requirements.

The job holder is accountable for the following activities during Topsides & Bridges EPCIC2 project execution :

To insure that structural and piping activities carried-out by Contractor, Subcontractors and Vendors are conform to established requirements.

To implement the CLIENT Technical Referential and applicable local and international codes.


Al Shaheen field development will involve several new projects that would be executed in parallel over the period of 5 years with CAPEX investment of around 3.

5 Billion USD. The Gallaf Project consists of :

Batch 1 EPCI1 : Three 24 slots WHP Jackets (FC, DC, EG), bridge linked to existing facilities and with permanent drilling decks.

Budget is around 100 MUSD. Water depth are 60 to 70m, Jacket weight is approx. 2000MT.

Batch1 EPCIC2 : Three production topsides and bridges for WHP (FC, DC, EG) to process and send production to existing facilities.

Topside weight is approx. 2500 MT, Bridge 100m / 800MT.

Batch2 EPCIC3 / 4 : 2 WHP (EH, CE) jacket topsides bridge linked to existing facilities in order to process and send production to existing facilities.

EPCIC3 will be for EPCC of facilities, EPCIC4 for all T&I and subsea works where applicable.

Gallaf Project is mainly a Greenfield Project with installation of 7 new WHP but there will be a major Brownfield challenge for integration of these new WHP into existing facilities in term of interfaces with other CLIENT entities and SIMOPS works.

Batch 1 jacket package phase is planned to be executed between Q3 2018 and Q3 2019 and Batch 1 Topsides package between end 2018 and Q3 2020.

Batch 2 is planned to be executed between 2019 and 2021.

The Batch 1 Topsides EPCIC2 STR / PVV supervisor is responsible for fabrication activities during construction activities performed by Contractor.

He will be based in to EPCIC2 Contractor's premises during EPC phase with travels to Major Project's premises and offshore as required and on board marine spread during the offshore activities.


To promote & comply with applicable safety instructions and other CLIENT HSE procedures in all activities,

To carry out work in compliance with CLIENT values and policies, relevant laws and regulations, agreed CLIENT priorities and objectives, CLIENT standards and procedures and good industry practices,

To review Shop drawings Documentation issued by the Contractor, Subcontractors and Vendors, conformity with the Approved detail engineering documentation.

Monitor pre-fabrication, assembly and erection activities carried out by Contractor

Review and approved the different progress / inspection reports issued by the Contractor.

Follow up the construction activities of Topsides and Bridges and insure proper records (NDE / inspection records follow-up).

Review and interpret all or part of radiography films in addition to the third party interpretation.

Perform UT Cross Check on critical welds.

Monitoring of NDT subcontractor and Contractor inspectors qualification and performance.

Identification and follow-up of any Non Conformance linked to NDT (NCRs).

Troubleshoot technical problems that may affect the construction and liaise with the Major Projects QAQC SPDT for the resolution.

Review manufacturing records books


Major Projects involve the development of new offshore platforms bridge linked to the existing facilities, installation of subsea pipelines and debottlenecking of the produced water treatment, all these activities could be executed across several international sites.

Projects will require complex interfaces with other entities of CLIENT.

EPC execution shall take place at Contractor premises,

Possibility of multiple worldwide missions and / or relocations to follow-up offshore installation campaign.


Qualification :

  • Education to HND / BTS level or COMPANY approved equivalent in engineering discipline.
  • NDT qualification (PCN, COFREND, CSWIP, BGAS or equivalent).
  • Certified operator level 2 for radiography.
  • Certified operator level 2 for UT (all joint configurations).
  • Capable to perform NDT techniques.
  • PAUT training
  • Large experience on similar activities at equivalent position.

    Familiar with TOTAL SA General Specifications

    English fluent.

    Professional Experience (number of years) : 10

    Experience within project : (number of years) : 5

    Good leadership skills and good communication skills,

    Ability to work on projects in a complex and multicultural environment,

    Good analytical skills,"

    بلغ عن هذه الوظيفة

    Thank you for reporting this job!

    Your feedback will help us improve the quality of our services.

    قدِّم طلب ترشيحك
    بريدي الالكتروني
    بالضغط على "واصل" ، أعطي موافقة neuvoo على معالجة بياناتي وإرسال تنبيهات إلي بالبريد الإلكتروني ، على النحو المفصل في سياسة خصوصية لـneuvoo . يجوز لي سحب موافقتي أو إلغاء الاشتراك في أي وقت.
    استمارة الطلب