QC Coating Inspector
Oceaneering
قطر
منذ 4 ساعات
source : tanqeeb

QC Coating InspectorNext Job

Job ID15190LocationQatar

Full / Part TimeFull-TimeRegular / TemporaryRegular

Company Profile

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning.

We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling.

We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.

Position Summary

Perform all activities necessary for QC Welding / Painting Inspection

Duties & Responsibilities

Raw Material Inspection

Check the welding consumable as per WPS

Check the bevel angle, root gap face as per WPS

Check the Fit-up root gap and misalignment as per WPS

Check the root pass and hot pass amps and volts

After completing fill and cap check visual inspection

For visual inspections, request client and submit the visual inspection report

Request NDT for the weld joint

After completing, request client to review the film

After the film review, submit all the reports for client’s signature

Release for further activities

Painting / Coating Activities

First check coating raw material inspection

Before blasting, clean weld joint with fresh water and check the salt level. If it is ok, proceed with sand blasting.

Continue monitoring the weather condition every 2 hours.

After completing the sand blasting, check the blasting profile, salt test, dust test, check the surface temperature, humidity and ambient temperature

After that primer, preheat and apply primer and check the primer thickness, as per requirement.

After that, heat the joint with induction coil to require temperature 180-200 DEG.

After that, apply heat shrink sleeve and go for holiday test 25 K.V and check the D.F.T of applied sleeve.

All activities should be witness as per I.T.P and client inspection

Make final report for coating and submit it to client for signature.

Supervisory Responsibilities

This position has no supervisory responsibilities.

Safety

Ensure that the Safety policies and procedures are understood and adhered to as far as is reasonably practicable in order to ensure a safe working environment.

Other

Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company.

Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.

Computer Skills

To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies.

  • Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data;
  • Designs work flows and procedures.

  • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions;
  • Works well in group problem solving situations; Uses reason even when dealing with emotional topics.

  • Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget;
  • Manages project team activities.

  • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs;
  • Presents numerical data effectively; Able to read and interpret written information.

  • Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; supports organization's goals and values;
  • Benefits organization through outside activities; Supports affirmative action and respects diversity.

  • Planning / Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives;
  • Organizes or schedules other people and their tasks; Develops realistic action plans.

  • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance;
  • Monitors own work to ensure quality.

  • Ethics - Treats people with respect; Keeps commitments; inspires the trust of others; Works with integrity and ethically;
  • Upholds organizational values.

    Qualifications

    To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required.

    Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    Painting

    BGAS (grade 3, 2, 1) NACE (level 1, 2, 3)

    Education and / or Experience

    Minimum of 5 years solid experience in QC Welding / Painting Inspection in Oil and Gas Industry

    Working Conditions

    This position is considered ONSHORE / OFFSHORE which is characterized as follows.

    Almost exclusively indoors / outdoors during the day and occasionally at night

    Occasional exposure to airborne dust in the work place

    Work surface is stable (flat)

    Physical Activity / Requirements

    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

    Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    This position is considered MEDIUM work.

    Lift 20-50 pounds

    Work in confined spaces, kneel, jump, run, and work while lying on stomach / back, crawl, and use repetitive movements of the arms and hands.

    Identify color differences

    Wear PPE for skin protection

    Lift 10-25 pounds

    Climb stairs / ladders, stand, balance, stoop, squat, reach, and lift / carry objects

    Twist body, sit with back supported, head forward / flexed, head tilted / rotated, and work with arms extended overhead.

    Lift up to 10 pounds

    Wear PPE protection for body, vision, and hearing protection

    Identity Check

    Primary Identity Document

    Passport or an official travel document showing birth date and parental details

    Current document of identity

    Current driver’s license copy issued by the government (Only for approved drivers of the radiation pick up)

    Secondary Identity Document

    Document confirming employment history, education, and personal referees

    Security Background Check

    The security background check shall include a security assessment and criminal history check issued by the competent authorities.

    Employee may be requested to get a good conduct certificate from the country of origin or a local police clearance certificate

    قدِّم طلب ترشيحك
    أضف الى المفضلات
    إزالة من الإشارات المرجعية
    قدِّم طلب ترشيحك
    بريدي الالكتروني
    بالضغط على "واصل" ، أعطي موافقة نيوفو على معالجة بياناتي وإرسال تنبيهات إلي بالبريد الإلكتروني ، على النحو المفصل في سياسة خصوصية لـ نيوفو . يجوز لي سحب موافقتي أو إلغاء الاشتراك في أي وقت.
    واصل
    استمارة الطلب