Sheet Metal Die Maker
Ingot Group Qatar
Doha
منذ 1 ساعة
source : ExploreJobs

1) Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary.

2) Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.

3) File, grind, shim, and adjust different parts to properly fit them together.4) Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.

5) Inspect finished dies for smoothness, contour conformity, and defects.6) Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.

7) Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, and rulers.

8) Select metals to be used from a range of metals and alloys, based on properties such as hardness and heat tolerance9) Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.

10) Set up and operate drill presses to drill and tap holes in parts for assembly.11) Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.

12) Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.

13) Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.

14) Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.15) Cast plastic tools or parts, or tungsten-carbide cutting tips, using pre-made molds.

16) Design jigs, fixtures, and templates for use as work aids in the fabrication of parts or products.17) Develop and design new tools and dies, using computer-aided design software.

18) Set pyrometer controls of heat-treating furnaces, and feed or place parts, tools, or assemblies into furnaces to harden.

EXPERIENCE IS A MUSTJob Types : Full-time, ContractExperience : Die Making : 3 years (Preferred)

بلغ عن هذه الوظيفة
checkmark

Thank you for reporting this job!

Your feedback will help us improve the quality of our services.

قدِّم طلب ترشيحك
بريدي الالكتروني
بالضغط على "واصل" ، أعطي موافقة neuvoo على معالجة بياناتي وإرسال تنبيهات إلي بالبريد الإلكتروني ، على النحو المفصل في سياسة خصوصية لـneuvoo . يجوز لي سحب موافقتي أو إلغاء الاشتراك في أي وقت.
واصل
استمارة الطلب